Westinghouse Outdoor Power Equipment | 13
OPERATION
CONTROL PANEL
OPERATION
2
5
1
3
4
6
7
8
9
10
11
1. +/- Buttons:
In cooling mode, press “+” or “-” button
to increase or decrease set temperature by 1°F (°C).
Set temperature range is 61°F (16°C)~86°F(30°C).
In dry or fan mode, this button is invalid.
2. Display:
Shows the set temperature in cooling mode.
3. Cool Mode Indicator
: When lit, unit is operating
in cool mode. The display shows set temperature.
Temperature setting range is 61°F (16°C)~86°F(30°C).
4. Dry Mode Indicator:
When lit, unit is operating in dry
mode. Display will be blank.
5. Fan Mode Indicator:
When lit, unit is operating in
fan mode. Display will be blank.
6. Mode Button:
Press this button to change modes
(Cool > Dry > Fan)
7. Timer Button
: Press this button and the mode will
circulate according to below sequence:
Press timer button to enter into timer setting mode.
Under this mode, press “+” or “-“ button to adjust the
timer setting. Timer setting will increase or decrease
0.5 hour by pressing “ + “ or “ -“ button within 10 hours,
while timer setting will increase or decrease 1 hour by
pressing “+” or “ “ button beyond 10 hours. After timer
setting is finished, the unit will display temperature if
there’s no operation for 5s. If timer function is started
up, the upper indicator will keep the display status.
Others, it won’t be displayed. In timer mode, press
timer button again to cancel timer mode
8. ON/OFF Button:
Use to turn the air conditioner on
or off.
9. Sleep Button:
Press sleep button to enter into sleep
mode. If the controller operates at cooling mode, after
sleep mode is started up, preset temperature will
increase by 2°F(1°C) within 1 hour; preset temperature
will increase by 4°F (2°C) within 2 hours and then the
unit will operate at this temperature all the time; Sleep
function is not available for fan mode or drying mode.
If sleep function is started up, the upper indicator will
keep the display status. Others, it won’t be displayed.
10. Fan Button:
Press to move through fan modes
(Low speed > Medium speed > High speed >
Auto)
11. Fan Speed Indicator:
Lights to show current fan
speed.