Westinghouse Westinghouse 540 upright cooker, Руководство пользователя

Страница: 26 / 34

26
INSTALLATION
INSTALLING yOUR NEW COOKER
WARNING
SAfETy WARNINGS AbOUT INSTALLATION
• The cooker MUST be installed and serviced only by an authorised person.
• A Certificate of Compliance MUST be supplied to be kept by the customer.
• The packing materials MUST be removed before you install the cooker.
• You MUST follow the installation instructions in this booklet.
• The surrounding kitchen cabinets MUST be able to withstand 85°C. Electrolux WIll NOT accept responsibility
for damage caused by installation into kitchen cabinets which cannot withstand 85°C.
• The appliance must not be installed in a corner. It must be installed at least 100mm from the side wall.
• The pipes used for installation MUST have sufficient loops so the cooker can be moved for service (gas models).
• The vents, openings and air spaces MUST NOT not be blocked.
• The anti-tilt plate MUST be installed to avoid accidental tipping.
• The stabilising bolt MUST be installed to avoid accidental moving.
• You MUST not pull the cooker by the door handles.
• The cooker MUST be checked every five years.
• Socket to be installed in an accessible position near the cooker (but not behind).
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or a similarly qualified
person in order to avoid a hazard.
Note: If the cooker is placed on a base, measures must be taken to prevent the appliance slipping from the base.
LOCATING THE COOKER
Study the diagrams below to be sure of the dimensions required to locate the cooker safely.
Make sure that the top of the cooker is at least 10mm higher than the level of the bench tops.
The appliance has been designed to fit in a 550mm wide gap in kitchen cabinets.
The cooker may also be installed at the end of a line of benches or with a free space on either side.
UPSWEPT HOb MOdEL – GAS REAR CONTROL MOdEL – ELECTRIC