Westinghouse Westinghouse 540 upright cooker, Руководство пользователя

Страница: 22 / 34

22
fITTING ANd
CLEANING
fITTING ACCESSORIES ANd CLEANING
CLEANING THE GAS HOb
REMOvING THE TRIvETS (REfER fIGURE 1)
• The trivets locate in the recessed area of the hob.
• They can be removed for cleaning by carefully lifting
them from the hob.
• Clean by washing in warm soapy water.
• Take care when replacing the trivets as dropping them
onto the hob may damage the enamelled surface.
• For wok burners only use the trivet suited to the
wok burner.
REMOvING THE bURNERS (REfER fIGURE 2)
• The burner caps and crowns are removable
for cleaning.
• Flame port blockage should be removed by means
of a match stick or brush.
• If the caps, crowns and cups are heavily soiled,
use a non-abrasive cleaning compound.
• Do not clean them with abrasive or caustic type
cleaners, or clean in a dishwasher as they will
be damaged.
Flame Port
Burner Cup
Spark Plug Hole
Spark Plug
Burner Crown
REfITTING THE bURNER CROWNS ANd CAPS
• The burner crown must be fitted correctly into the
burner cup or damage will occur during operation.
• To do this, ensure that the 2 ribs on either side of the
spark plug hole are positioned into the 2 slots on the
burner cup. (See figure 2).
• The burner cap is simply positioned over the top of the
burner crown.
Note: When the burner is correctly fitted it will sit level
on the hob.
REMOvING ANd fITTING THE GRILL dISH
• To remove the Grill Dish simply pull forwards
and upwards.
• To replace the Grill Dish ensure that the rear of
the dish is engaged with the side support before
sliding backwards.
CLEANING THE GRILL
REMOvING THE GRILL dISH SUPPORTS
The grill dish supports can be removed to aid in the
cleaning of the Grill Compartment.
• To remove them, simply grasp the supports at the front
and pull them inwards.
• To install the grill dish supports, first insert the rear hook
to the rear hole.
• Then locate the front peg into the front hole and push
in firmly.
Figure 1
Figure 2
Engagement of
rear of dish