Westinghouse PDP790, Руководство пользователя

Страница: 17 / 36

17
OPERATING THE ELECTRONIC CLOCK (Continued)
MODEL POP783 PROGRAMMABLE CONTROLLER
Touch Control
Setting the time of day
After the appliance has been electrically connected the "set clock" symbol and "timer
arrow will flash on the clock display.
1. To set the time of day in hours and minutes press the – or +. 5 seconds after the last
change the "timer arrow" will disappear, confirming the time has been set.
NOTE: The clock has a 24-hour display.
Change the time of day (Daylight saving)
1. Switch off the appliance by pressing "On / Off".
2. Press "Timer" as many times as necessary until the "set clock" symbol and "timer
arrow" flash on the clock display.
3. Press "+" or "–" to change the time. 5 seconds after the last change the "set clock"
symbol and "timer arrow" will disappear, confirming the time has been set.
Setting the oven function
1. Switch on the appliance by pressing the "On / Off". The oven lights will light.
2. Press the "Function" as many times as necessary until the desired function appears. The
suggested cooking temperature appears in the display and the degrees symbol "°"
flashes. If the suggested temperature is not changed within approximately 5 seconds the
degrees symbol "°" stops flashing and the oven begins to heat. The suggested
To check or cancel settings
1. To check your settings, press "mode" until the setting you want is displayed. A red light will
flash next to the mode (cook time, end time etc) that is currently on display.
2. To cancel "delayed start" press "mode" until a light flashes next to "end time". Press and hold
"–" until the clock no longer reverses ("0:00" and you will hear a beep). If you have left the
temperature and function knobs at a setting the oven will start once the "end time" light stops
flashing.
3. To cancel "auto shut off" press "mode" until a light flashes next to "cook time". Press and hold
"–" until the clock no longer reverses ("0:00" and you will hear a beep). This automatically
cancels "delayed start". If you have left the temperature and function knobs at a setting, the
oven will start once the "cook time" light stops flashing. Because you have cancelled “auto off”
the oven will continue to heat until you manually turn it off.
On completion of cooking
The oven will turn off, the timer will beep and the "end time" and/or "cook time" indicators will
flash.
1. Turn the function and temperature controls to the off position.
2. Press "+" or "–" or "mode" to stop the timer from beeping.
Switching the clock display ON and OFF
1. Press together "+" and "–" for 2 seconds to switch ’off’ the display.
2. Press together "+" and "–" for 2 seconds to switch the clock display ’on’ again.
Note: If a timer mode is set, then it is not possible to switch the display off.
145107 SIMPRD_342-1-539 from Backup 2/6/08 10:19 AM Page 17