ISSUED: 03-02-05 SHEET #: 201-9324-1
2 of 9
Visit the Westinghouse Web Site at www.westinghousedigital.com
For customer service call
1-866-287-5555
.
Note:
Read entire instruction sheet before you start installation and assembly.
Tools Needed for Assembly
• stud finder ("edge to edge" stud finder is recommended)
• phillips screwdriver
• drill with 1/4" and 5/32" drill bits
Table of Contents
Parts List ....................................................................................................................................................................... 3
Installation to Wood Stud Wall ...................................................................................................................................... 4
Installation to Solid Concrete and Cinder Block ............................................................................................................. 5
Installing Flat Panel Screen to Wall Mount .................................................................................................................... 6
Adjusting the Horizontal Position and Tilt of the Flat Panel Screen ................................................................................ 7
Removing Flat Panel Screen from Wall Mount ............................................................................................................... 8
• Do not begin to install your Westinghouse product until you have read and understood the instructions and
warnings contained in this Installation Sheet. If you have any questions regarding any of the instructions or
warnings, please call Westinghouse customer service at 1-866-287-5555.
• Make sure that the wall will safely support the combined load of the equipment and all attached hardware and
components.
• Never exceed the Maximum Load Capacity of 80 lb (36.3 kg).
• If mounting to wood wall studs, make sure that mounting screws are anchored into the center of the studs. Use of
an "edge to edge" stud finder is highly recommended.
• Do not lift more weight than you can handle. Use additional man power or mechanical lifting equipment to safely
remove the screen.
• Tighten screws firmly, but do not overtighten. Overtightening can damage the items, greatly reducing their holding
power.
WARNING