background image

Westinghouse Outdoor Power Equipment, LLC | 5

 

•  DO NOT expose the unit to microwave  

energy or a pressurized container.

•  DO NOT allow pins, wires or other metal 

pieces to be inserted into the device case, 

outlets, or controls. Metal pieces may short 

circuit the product.

•  DO NOT disassemble, repair or modify the 

unit or the battery.

• 

DO NOT place the unit close to or in a fire 

or expose it to heat. Keep out of direct 

sunlight.

•  DO NOT charge, use or store the unit in a 

bathroom or in an area exposed to rain or 

moisture.

•  Only use the outlets to power external 

devices. Never connect the outlets to main 

building power under any circumstances.

•  DO NOT touch the unit or the plug-in points 

if your hands are wet.

•  DO NOT connect any metallic objects to 

the AC input or output.

• 

DO NOT rub your eyes if fluid from inside 

the unit gets on your hands.

•  DO NOT dispose the unit together with 

household waste.

•  DO NOT use any inappropriate or damaged 

power cords.

•  DO NOT operate the unit above the 

specified input voltage.

•  DO NOT use the unit if it is not functioning 

correctly.

•  DO NOT move the unit if it is recharging or 

in use.

•  DO NOT leave unit outside in rain or snow.
•  Use and store the unit only in a clean and 

dry environment. DO NOT use and store in 

dusty or wet environment.

•  Check the unit prior to every use. DO NOT 

use the unit if it is damaged or broken.

•  DO NOT use the unit if the power cord is 

damaged or broken.

•  Keep the unit away from children. DO NOT 

let children use the Power Station.

•  Keep this product away from pets.
•  DO NOT use or store the unit in an area or 

environment with high temperature.

• 

Should fluid from inside of the unit come in 

contact with your skin or clothing, wash the 

affected areas with tap water.

•  In a storm, unplug the power cord from the 

socket.

•  DO NOT charge the unit via power supply 

systems that operate outside of 120V 

range.

•  DO NOT place the unit on its side or upside 

down while in use or storage.

•  If rust, peculiar odors, overheating or other 

abnormal circumstances are observed, 

stop using the unit immediately and contact 

customer service.

•  Make sure that the unit is properly secured 

when transporting it in a motor vehicle.

•  Only charge, use and store the unit within 

an ambient temperature of  

32° – 113°F (0° – 45°C).

•  Turn the unit off immediately if it has 

accidentally fallen, was dropped or was 

exposed to vibrations.

•  Carefully read the instructions for the 

electric devices that you intend to connect.

•  Make sure that the device you are 

connecting is switched off before you 

connect it.

•  DO NOT use the product with incompatible 

components or alter the product in any way.

 

Содержание iGen1000s



















Отзывы: