14
Westin Automotive Products, Inc.
320 W. Covina Blvd
San Dimas, Ca. 91773
Thank you for choosing Westin products
for additional installation assistance please call
Customer Service (800) 793-7846
www.westinautomotive.com
P.N.: 75-598202-RevB
ECO #: W18-0140
DATE: 10/03/18
22. Before mounting the rear view camera, use the supplied Corrugated Sleeve (39) to wrap the areas of the wire inside the tire
carrier.
Note:
The wire can be fed through the access hole in the Tire Carrier (1). See Figure 18.
23. Obtain the Camera Mounting Bracket (11) and attach the camera using the supplied M3 Screws (13).
See Figure 19.
24. Slide the camera into the Camera Extension Bracket (11) and secure it using the supplied M5 Hardware.
See Figure 20.
Note: There is a small amount of adjustment for the camera by loosening the bolts and adjusting using the access hole on
the underside of the Extension (11).
25.
DRIVE THE VEHICLE FOR 50-75 MILES. THEN READJUST TURN-BUCKLES AND RE-TORQUE
MOUNTING HARDWARE.
Fig 20
M5 Bolt, Flat Wash-
er, and Lock Washer
25. To install the brake light, remove the 2
screws from the stock bracket and reuse them
to install on the top of the Chimsel Bracket
(10).
See Figures 21 & 22.
Fig 21
Fig 22
Fig 19
The M3 Screws will be used in all three mounting locations
Fig 18
Feed camera wire
through here
