5
Westin Automotive Products, Inc.
320 W. Covina Blvd
San Dimas, Ca. 91773
Thank you for choosing Westin products
for additional installation assistance please call
Customer Service (800) 793-7846
www.westinautomotive.com
P.N.: 75-588108-RevA
ECO #: W19-0084
DATE: 4/01/2020
9. Using M8 hardware, install trailer connector bracket (7) to the back plate of the bumper. Adjust up and down as desired
and tighten M8 hardware to 15-18 ft-lbs.
See
Figure 7.
Fig. 7
10. Using M6 SEMS button head hardware , install license plate swing mount on bumper. Tighten M6 hardware to 5-7 ft-lbs.
See Figure 8
.
11. Install license plate on the swing mount using M6 SEMS button head hardware and tighten to 5-7 ft-lbs.
12. Tighten the two nylon lock nuts on the sides until it has just enough resistance to prevent rotation due to normal condition
while still allowing rotation by hand when desired or needed to access hitch.
WARNING .
After you have mounted bumper on main brackets. CAREFULLY open tailgate. While tailgate is open, adjust the height of the bumper so that it
has about 3/8” of clearance with respect to the tailgate. Then, tighten all M12 hardware to 50-55 ft-lbs.
