fb.com/westhillbikes
|
westhillbikes.com
Power-on Password Disable/Enable
To enable or disable
Start PassWord
settings, press the “+” or the “-” button to select ON or
OFF. ON means enabling a power-on password while OFF means disabling a power-on password.
The default value is OFF. To enable a power-on password, choose ON and press “i” button to
confirm and input the current password or default password ’0314’. Press the “+”or the “-”
button to change the number and press the “i” button to confirm digits one by one until the
correct password (current password or default password ’0314’) is completed. To disable the
current password, choose OFF and press “i” button to confirm and input the current password
correctly. The screen displays ‘PassWord Canceled Successfully’. *Then the display password
restores the default code '0314'.
Power-on Password Reset
From the last interface above, press the “+” or the “-” button to select
‘Reset PassWord’
and
press the “i” button to access the power-on password reset interface. There are 3 pages for
setting up a new password: In the first page, please enter the current password or default
password ‘0314’ correctly. Then it moves to the second page for inputting a new password.
Press the “+” or the “-” button to increase or decrease the number and then press the “i”
button to confirm digits one by one until a new 4-digit password is completed. Finally, it comes
to the third page and reenter the new password again for confirmation. The screen displays ‘
PassWord Reset Successfully’. When switching on the E-bike system next time, please enter the
new password to power on.
Exit Settings
In the settings interface,
1. Briefly press the “i” button to confirm and store a changed setting but stay within current setting menu.
2. Hold the “i” button for 1 second to store a changed setting and exit the current setting menu and return
to display start-up interface.
3. Hold the “-” button for 1 second to cancel the setting operations without storing a change and return to
display start-up interface.
If there is no setting operation in one minute; the display will exit the settings state.
23
