fb.com/westhillbikes
|
westhillbikes.com
Assist Level Selection
Briefly press "+" or "-" button to switch between assistance
levels to change the motor output power. The default
assistance level ranges from level “0” to level “5”. The output
power is zero on Level “0”. Level “1” is the minimum power.
Level “5” is the maximum power. When you reach “5”and
press the "+" button again, the interface will still show “5” and
will blink to indicate it has reached the highest power setting.
After the power downshift reaches "0" and the "-" button is
pressed again, the interface will still show “0” and will blink to
indicate the power minimum. The default value is level “1”.
Motor Power
Indicator
The power of
the motor can
be read via
shown interface.
USB connection
indication
When the display is
inserted into a USB
external device, the
display interface will
show as below.
Battery SOC Indicator
The five battery bars represent the capacity of the battery.
The five battery bars are bright when the battery is in high
voltage. When percentage is 0%, the battery needs to be
recharged immediately.
Switching the Headlight On/Off
To switch on the headlight, hold the
button. The backlight
brightness is automatically reduced. Hold the button again to
switch the headlight off. The front light additionally has a light
sensor function. This means if the bike is in a dark place, the light
will automatically turn on, and if the light is on in a bright
location, the headlight will automatically be switched off.
17
