Westfalia ZIJ-J2-16TH-D, Инструкция по эксплуатации

Страница: 15 / 23

10
Assembling
Before first Use
Unpack the chain saw sharpener and check all parts for any damage in transit.
Dispose of packaging materials or store it out of reach of children. Plastic bags
etc. may become a deadly toy for children.
Assembling
The chain saw sharpener is suitable for installation on drill machines with a 43
mm clamping neck and a keyed chuck. Rapid clamping chucks are not suitable
because of their greater length. The chain saw sharpener is supplied only partly
assembled. Please assemble the unit as follows:
1. Place the base plate (A) on a solid, level
surface, e.g. a work bench. Ensure that the
base plate (A) extends out far enough over the
edge of the work bench so that the chainsaw
chain can hang down freely and you can
easily access the angle adjustment screw (L)
at the bottom. Mount the base plate (A) on the
fastening holes (O).
2. Place the mounted chain holder assembly (J) on the base plate (A) and
fasten it from below with the swivel plate (part no. 19) and the angle adjust-
ment screw (L). By loosening the angle adjustment screw (L) and by turning
the mounted chain holder assembly (J) you can adjust the angle of the chain
holder assembly.
3. Mount both clamps (C und D) on the
clamping neck, not on the chuck. Make
sure both clamps are orientated correctly
– The sticking-out part must point towards
the drilling machine.