Westfalia 85 34 94, Инструкция по эксплуатации

Страница: 13 / 22

Operation
9
Mounting

Remove the gearbox. For doing this, loose and remove the
necessary components. Remove the clutch.

Make optical inspection of the flywheel for wear (grooves,
damages due to high temperatures, etc.). If necessary replace
the flywheel.

For the exact fixation of the clutch disc, choose the correspond-
ing centring pin from the tool set.

Choose the corresponding fixing screws (please consider the
thread size M6/M7/M8).

Insert 3 fixing screws resp. the 4 fixing screws (with the short
thread end) at a distance of 120° resp. of 90° from one another
and fix them finger-tight into the threads of the flywheel.

Choose the corresponding alignment plate (with 3-hole pitch or
4-hole pitch) and screw the spindle with the handle into the
alignment plate. Turn it completely back.

Use the knurled nuts to tighten the spindle with handle and the
alignment plate onto the clutch and fix them snugly with the
fixing screws.

Turn the spindle until the diaphragm spring reaches the limit stop
(alignment plate fits seamlessly on the flywheel).

Insert and tighten the fixing screws of the alignment plate into
the thread holes of the flywheel and turn the spindle to relieve
the diaphragm spring.

Now remove the knurled nuts, the alignment plate with spindle
and the fixing screws.

Insert the fastening screws and tighten all screws down to the
specified torque (follow the instructions of the manufacturer).

Remove the centring pin.