Westfalia 85 27 06, Инструкция по эксплуатации

Страница: 32 / 40

Programming
28
Programming the Remote Control
1. When the unit is in standby mode
(the display shows “ – – “) press and
release the learn button in order to
learn the remote control. The LED
display will show
Ln .
2. Press one key on the remote
control twice within 2 seconds. The
display will flash
Ln for 4 seconds.
Afterwards the display will turn to
“
– – “. The remote control has been
learnt successfully.
If you want to use more remote
controls, repeat the above mentioned steps. Up to 6 remote
controls can be programmed. If you lose one remote control, for
safety reason, please program all other remote controls to have
a new code.
Erase all Remote Control Codes
Press and hold the learn button until the LED display shows
“
dL
“.
Now all remote codes have been erased. Release the learn button
and the display turns back to “
– – “.
For programming the remote control again, see chapter above.
Please instruct all persons how to use the gate opener correctly and
safely.
The swing gate opener can be operated with the included remote
control as soon as the remote control is learned.
Learn
Button