Westfalia 85 27 06, Инструкция по эксплуатации

Страница: 31 / 40

Programming
27
Pd Return to Factory Settings
1. To set the program to factory settings, hold the button FUNC
pressed for more than 4 seconds.
2. The display shows P1 .
The unit is in the setting mode for operating 1 resp. 2 gate
openers.
3. Press FUNC several times until the display shows Pd . Hold the
button INC pressed for approx. 2 seconds in order to set the
program to factory settings. The display shows
dF .
4. If all adjustments are made and in order to quit the program,
press the button FUNC
. The display shows “ – – “. The unit
enters standby mode again.