Westfalia 82 88 33, Инструкция по эксплуатации

Страница: 21 / 26

17
Operating
Air Pressure and Air Volume

Operate the air caulking gun with a pressure of 4 – 6 bar. Exceeding the max.
permitted pressure level of 6.2 bar will significantly reduce the lifetime of the
tool. The ideal air suction capacity is provided by compressors with a suction
capacity of approx. 200 – 250 l/min.
 Only use air hoses with an inner diameter of at least 9 mm. When setting up
the air pressure, always keep in mind that the pressure will decrease by ap-
prox. 0.6 bar when using a 10 m long hose with an inner diameter of 9 mm.
Maintenance and Care
 To ensure proper functionality and a long lifetime, diligent lubrication and
maintenance are essential.
 Use a suitable silicone free grease to grease all moving parts of the air
caulking gun.
 For operating pneumatic tools clean air is required. Corrosion residues, dust
and dirt from the pneumatic pipes reduce the efficiency of the tool and will
cause technical problems.
 The air tool requires clean and oil-free air. Therefore do not use an oil-fog
lubricator within the air supply system.
 If possible, only use compressed air hoses for the air supply that previously
have not been used with other air tools which required an oil-fog lubrication
system.
 If necessary clean the air tool and the accessory with a moist cloth.
 Do not use abrasive or aggressive chemicals as benzene or thinner, which
may dissolve plastic parts.
 Do not allow liquids to enter the tool and never immerse it into liquids. Water in
the compressed air inlet can damage the machine. Therefore it is recommend-
ed to drain the air lines and the compressor in regular intervals! Also clean the
air filters in regular intervals.
Storing
 Store the unit indoors in a dust and dirt-free and dry location, between 10 °C
and 30 °C
 Keep the unit out of reach of children and persons in need of supervision.