Westfalia 82 63 73, Инструкция по эксплуатации

Страница: 13 / 30

Mounting
9
1. Unscrew the 4 screws from the housing of the sliding gate opener and
remove the cover.
2. Mount the sliding gate opener on a trial base on the mounting plate (5) by
using the included screws (13) and nuts (11) as well as the washers (9 and
10).
3. Disengage the sliding gate opener by using the included releasing key. For
mounting the nylon racks, close the gate by hand.
4. Place the rack on the gearwheel of the sliding gate opener. Adjust the rack on
the gearwheel. Make sure to have a space of approx. 1 mm between the rack
and the gearwheel and fix the rack with the self-securing screws. The bar
must be positioned absolutely horizontal on the gearwheel. Never use fat or
other lubricating agents between the gearwheel and the rack!
5. Adjust the other racks, too. Make sure the teeth of the racks engage the
gearwheel throughout their full thickness. If not, re-adjust the position of the
sliding gate opener! When mounting the racks make sure that the transitions
between the individual toothed racks are smooth to ensure uniform gate
movement.
6. Protect the sliding gate opener from entering humidity with the included
rubber plug. If necessary seal all openings by using silicone.
7. Re-engage the emergency release with the included releasing key. For doing
this, turn the key clockwise to 90°.
8. If the positions of the racks and the sliding gate opener are correct, fix the
sliding gate opener on the mounting plate (5) and re-tighten the cover on the
motor housing.