QWTIME
Document: DOK11093en01
Author: PM
Date: 2021-12-22
Page: 8 of 13
WESTERSTRAND URFABRIK AB
P.O. Box 133
Tel. +46 506 48000
Internet:: http://www.westerstrand.se
SE-545 23 TÖREBODA
Fax. +46 50648051
E-mail:
Connection 230V
NOTE! When connecting 230V, the following applies:
- For fixed connection: connection to the mains supply must be made via an easily accessible
separate control switch (2-pin, 3mm contact gap)
- For plug connection: The wall socket must be close to the control box and be easily accessible.
Connecting speakers
The speaker, which is packed separately, comes with a fixed connection cable of 0.6 meters. Use this if the
speaker is mounted near the control box. If a longer distance is needed between the box and the speaker, the
cable can be spliced. Up to 50 meters is allowed with a cable dimension of 1.5 mm2.
The speaker has an impedance of 4 Ohm and can, if necessary, be connected in series with another speaker. The
series connection can either be made directly in the internal connection terminal, see below, or in an external
connection box. Parallel connection is not allowed because the impedance will be too low.
Connection of one speaker
Connection of two, series-connected speakers
