QWTIME
Document: DOK11093en01
Author: PM
Date: 2021-12-22
Page: 6 of 13
WESTERSTRAND URFABRIK AB
P.O. Box 133
Tel. +46 506 48000
Internet:: http://www.westerstrand.se
SE-545 23 TÖREBODA
Fax. +46 50648051
E-mail:
Installation
Before the WL-BELL is mounted on the wall some settings must be done.
To make the settings, the control box cover must be removed. See photo under section 4, connection.
1. Work Mode
Choose work mode, by setting the DIP-switches in correct position. Factory default is wireless. The DIP switch
is accessible from inside the control box. Please note that the DIP-switch is only read directly after power up.
DIP switch
Work Mode
DIP 1
DIP 2
DIP 3
DIP 4
Remark
1. Wireless communication
OFF
OFF
OFF
OFF
2. Wired communication RS485
ON
OFF
OFF
OFF
3. Wired, closing contact
OFF
ON
OFF
ON
4. Wired, play instantly
ON
ON
OFF
OFF
Play instantly when powered on.
Remark: Switch power OFF/ON if the DIP switch is changed.
2. Melody selection
The unit is delivered with a SD memory card containing 16 pre-programmed sounds. The SD-card is accessible
from inside the control box.
In wired work mode the selection of melody is done using the configuration buttons on the left side of the pc-
board. In wireless mode the selection is done in the Master Clock.
3. Mechanical Installation
Mount the unit on the wall using the four mounting holes and suitable screws (screws are not included).
OFF
ON
