Lit. No. 78532, Rev. 02
24
March 15, 2019
5. Back the vehicle away from the snowplow.
6. Place the electrical plugs in the storage boot on
the snowplow.
7. The receiver assemblies can be detached from
the vehicle, if desired, by removing the two
1/2" x 4" pins with cotters that attach the receivers
to the mount assemblies.
DETACHING SNOWPLOW FROM VEHICLE
DETACHING THE SNOWPLOW
1. With the blade straight, lower the snowplow to the
ground. Activate FLOAT mode, then turn the plow
control OFF. Apply the vehicle parking brake.
2. Unplug the electrical harness.
NOTE: After each disconnection of the snowplow,
reapply dielectric grease to the electrical plugs to
maintain the protective coating on the terminals.
3. Pull the stand lock pin outward and let the stand
drop to the ground. Release the stand lock pin.
Verify that the stand is locked by trying to lift
the stand.
4. Pull both receiver hitch pins outward and rotate
them to lock into their receiver notches.
WARNING
Keep 8' clear of the blade when it is being
raised, lowered, or angled. Do not stand
between vehicle and blade or directly in front
of the blade. If the blade hits or drops on you,
you could be seriously injured.
WARNING
Inspect snowplow components and bolts
for wear or damage whenever attaching or
detaching the snowplow. Worn or damaged
components could allow the snowplow to
drop unexpectedly.
Stand Handle
Stand
Stand
Lock Pin
1/2" x 4" Pins
with Cotters
Содержание DEFENDER Compact Plow
Страница 2: ...Lit No 78532 Rev 02 2 March 15 2019 ...
Страница 4: ...Lit No 78532 Rev 02 4 March 15 2019 ...
