Western Telematic IPS-800CE-D16, IPS-1600CE-D16 Скачать руководство пользователя страница 49

Страница: 49 / 58

8-1

8. Upgrading the IPS Firmware

When new, improved versions of the IPS ﬁrmware become available, the

"Upgrade Firmware" function can be used to update the unit. Updates can be

installed via the Console Port or Network Port.

Notes:

• The upgrade procedure can only be performed via the Text Interface.
• All other network ports will be disabled during the ﬁrmware

upgrade procedure.

• When the upgrade procedure is complete, all parameters will be set

to their default states. Therefore, it is recommended to save IPS

conﬁguration parameters to an ASCII ﬁle (as described in Section 7)

before beginning this upgrade procedure.

1. Obtain the update ﬁle. Firmware modiﬁcations can either be mailed to

the customer on a CDR, or downloaded from WTI. Place the upgrade

CDR in your disk drive or copy the ﬁle to your hard drive.

2. Access the IPS command mode via the Text Interface. When the

password prompt is displayed, key in the System Level Password.

3. When the command prompt appears, type

and press

[Enter]

. The

IPS will display a screen which offers the following options:
•  1. Upgrade Sector 0
•  2. Upgrade Sectors 1 - 4
•  3. Upgrade Sectors 5 - 7
•  4. Abort Upgrade

Note:

Instructions regarding the proper Sector option will be supplied

when upgrades become available.

Select the Sector Option indicated for the upgrade and press

[Enter]

, or

type

[Enter]

to abort the upgrade procedure.

Содержание IPS-800CE-D16, IPS-1600CE-D16



























































Результаты поиска

Содержание IPS-800CE-D16, IPS-1600CE-D16

Отзывы:

Бренды по названию

Популярные бренды

Western Telematic IPS-800CE-D16, IPS-1600CE-D16, Руководство пользователя

Результаты поиска

Содержание IPS-800CE-D16, IPS-1600CE-D16

Отзывы:

Бренды по названию

Популярные бренды