16
INSTALLATION & TECHNICAL MANUAL
CONFIGURATION & OPTIONS
The Aurora uses two banks of Dip Switches on the Controller board (SW 3 &
SW 4) to set-up the configuration and options.
CONFIG SWITCHES
The “CONFIG” bank of dip switches (SW 3) is for the following features:
Switches 1 & 2: Daytime Brightness
There are 4 selectable brightness levels. The built-in photo sensor automatically
detects daylight conditions and sets the display brightness to this level.
BRIGHTNESS LEVEL
SWITCH 1
SWITCH 2
High (Default)
ON
ON
Medium-High OFF ON
Medium-Low ON OFF
Low OFF
OFF
Switches 3 & 4: Nighttime Brightness
There are 4 selectable brightness levels. The built-in photo sensor automatically
detects nighttime conditions and sets the display brightness to this level.
BRIGHTNESS LEVEL
SWITCH 3
SWITCH 4
High ON
ON
Medium-High OFF ON
Medium-Low ON OFF
Low (Default)
OFF
OFF
NOTE: Dip Switch settings take effect only after the Aurora has
been reset (Cycle power directly or press the “RESET” button).
NOTE: Lowering the brightness level at night helps reduce
nighttime glare and energy costs. Passing headlights,
spotlights, etc. will NOT activate the daytime brightness level.
Содержание AURORA 45
Страница 1: ......
