Page 4
SKU 47277
For technical questions, please call 1-800-444-3353.
Helmet Safety Warnings and Precautions
1. The Welding Helmet is not suitable for laser welding processes, and not suitable for
Oxyacetylene welding/cutting processes.
2. The Welding Helmet’s Auto-Darkening filter must never be placed on hot surfaces.
3. Never open or tamper with the Auto-Darkening filter.
4. The Welding Helmet will not protect against severe impact hazards, including
fragmenting grinding disks; never use Welding Helmet when grinding.
5. The Welding Helmet will not protect against explosive devices or corrosive liquids.
6. Don’t make any modifications to either the filter or helmet, other than those specified in
this manual. Don’t use any replacement parts other than those specified in this
manual. Unauthorized modifications and replacement parts will void the warranty and
expose the user to the risk of personal injury.
7. Should the Auto-Darkening Welding Helmet not darken upon striking an arc, stop
welding immediately and have the helmet checked by an authorized service
technician.
8. Don’t immerse the filter in water.
9. Don’t use any solvents on filter’s screen or helmet components.
10. Use only at temperatures: 23 degrees F. to 131 degrees F.
11. Storing temperature: -4 degrees F to -158 degrees F.
12. Protect filter from liquid and dirt contact.
13. Clean filter’s surfaces regularly; do not use strong cleaning solutions. Always keep
sensors and solar cells clean using a clean lint-free tissue/cloth.
14. Regularly replace the cracked/scratched/pitted Front Cover Lens.
Warning: Severe personal injury could occur if the user fails to follow the
aforementioned warnings, and/or fails to follow the operation instructions.
Warning: Read and understand all instructions before using!
REV 05/04
