Page 2
SKU 47277
For technical questions, please call 1-800-444-3353.
Specifications
Welding Protection Types
For All Arc Welding Processes; Not for
Laser Welding Processes; Not for Oxyacetylene
Welding/Cutting Processes. Clear State: 3 / 4
Shell Material
High Impact Resistant Plastic
Darkness Range
9 to 13; Clear State: 3 / 4
Lens Protection
UV / IR up to 16 (DIN) at all times; ANSI Approved
Viewing Area
6.52 Square Inch
Size of Filter Cartridges
4.33” x 3.54” x .35”
Lens Switching Speed
1/25,000 Second
Lens Clear Time Control
Adjustment for dark-to-clear recovery time
Sensitivity
Can be adjusted at high/low level-see page 6
Power Source
Solar Cells (no battery required)
Weight
0.90 Lbs.
Power ON / OFF
Fully Automatic
Operating Temperature
23 degrees F. to 131 degrees F.
Storing Temperature
-4 degrees F. to 158 degrees F.
Save This Manual
You will need the manual for the safety warnings and precautions, assembly instructions,
operating and maintenance procedures, parts list and diagram. Keep your invoice with this
manual. Write the invoice number on the inside of the front cover. Keep the manual and
invoice in a safe and dry place for future reference.
Safety Warnings and Precautions
WARNING: When using tool, basic safety precautions should always be followed to re-
duce the risk of personal injury and damage to equipment.
Read all instructions before using this tool!
1.
Do not use the Welding Helmet if the lens is cracked, the lens and sensors are
dirty, or the lens and front retaining frame are loose.
2.
Keep work area clean
. Cluttered areas invite injuries.
3.
Observe work area conditions
. Do not use machines or power tools in damp or wet
locations. Don’t expose to rain. Keep work area well lighted. Do not use electrically
powered tools in the presence of flammable gases or liquids.
4.
Keep children away
. Children must never be allowed in the work area. Do not let
them handle machines, tools, or extension cords.
REV 05/03; 05/05
