Western Digital FireWire PCI Adapter, Руководство по установке

Страница: 9 / 15

INSTALLATION AND SETUP - 6
Hardware Installation—Windows and Macintosh
The Western Digital FireWire PCI Adapter must be installed in one of
your computer’s PCI slots.
1. With your computer shut down and unplugged, remove the
computer's outside cover.
2. Install the adapter in an open PCI slot in your computer by
carefully pushing the adapter into the PCI slot, holding the card
by the external edges only (see illustration below).
FireWire PCI Adapter Installation
3. Macintosh : Close your computer, restart, and follow the setup
instructions for “Macintosh Installation” on page 7.
Windows Me/2000/XP: Windows 2000 automatically detects and
configures your FireWire PCI Adapter. Close your computer and
restart.
Windows 98 SE only: Close your computer and restart. After your
computer has finished rebooting, you will see a series of five
Version Conflict dialog boxes, each informing you that the file
being copied is older than the file currently on your computer.
Click Yes in each dialog box to keep your existing file (clicking No
will prevent the drivers from loading properly). These dialog boxes
will only display the first time you install your FireWire PCI
Adapter.
IMPORTANT
Your system must be
turned off and
unplugged before
installation. Refer to
your computer system’s
manual for specific
instructions on opening
your computer and
installing a PCI card.