background image

4

6642-22541

4

Safety

Read this manual and gather all available information on the product. Make sure you 
understand it fully before connecting the product to a power supply. Check that your 
application does not exceed the safe operating specifications for this product.

This symbol means that the product shall not be treated 
as unsorted municipal waste when disposing of it. It needs 
to be handed over to an applicable collection point for 
recycling electrical and electronic equipment. 

By ensuring this product is disposed of correctly, you will 
help to reduce hazardous substances and prevent potential 
negative consequences to both environment and human 
health, which could be caused by inappropriate disposal. 

Product disposal 

Care recommendations

Follow the care recommendations below to maintain full operation of the product and 
tofulfill the warranty obligations:
• Do not drop, knock or shake the product. Rough handling above the specification may 
cause damage to internal circuit boards.
• Use a dry or slightly water-damp cloth to clean the product. Do not use harsh 
chemicals, cleaning solvents or strong detergents.
• Do not paint the product. Paint can clog the product and prevent proper operation. 
If the product is used in a manner not according to specification, the protection provided 
by the equipment may be impaired.
If the product is not working properly, contact the place of purchase, nearest Westermo 
distributor office or Westermo technical support.

Содержание Wolverine DDW-142-12VDC-BP























Отзывы: