52
Aggregation Setting
Trunk Size:
The switch can support up to 8 trunk groups. Each trunk group can
support up to 8 member ports. Since the member ports should use same
speed/duplex, the maximum trunk size is decided by the port volume.
Group ID:
Group ID is the ID for the port trunking group. Ports with same group
ID are in the same group. Click None, you can select the Trunk ID from Trunk 1 to
Trunk 8.
Trunk Type: Static
and
802.3ad LACP.
Each Trunk Group can only support Static or
802.3ad LACP. Choose the type you need here. The not active port can’t be setup
here.
Aggregation Status
This page shows the status of port aggregation. Once the aggregation ports are
negotiated well, you will see following status.
Содержание MDI-112 Series
