manualshive.com logo in svg

Westermo 3623-077001, Руководство пользователя

Поделиться
Скачать
Westermo 3623-077001 Скачать руководство пользователя страница 21

NOTE
This product has no replaceable fuse and should be connected via an
external fuse for protection.

NOTE
External connector Binder 99-4222-00-04 (outer cable diameter 6 to 9.5
mm) or Binder 99-4222-14-04 (outer cable diameter 10 to 12 mm) shall
be used in order to fulfill the specified ingress protection code at the
power connector.

4.5. Cooling

This product uses convection cooling. Make sure that it is installed so that the ambient
temperature is within the specified temperature range, e.g. by avoiding obstruction of the
airflow around the product.

It is recommended to install the product in areas where the natural convection airflow is
not blocked and that there is enough spacing around the product.

Figure 8. Installation with reduced natural convection
airflow

Figure 9. Installation with natural convection airflow

When operating the product at high ambient temperatures, it is recommended to mount
the product to a metallic base plate to improve the heat dissipation. The base plate
increases the surface to spread the heat.

Ibex-RT-370 Series

21

Содержание 3623-077001

































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды