Section AIS‐RM3‐20B
030‐101806 Rev. A
R
1310IBRA
6
Figure 10. Logging Out
See Part 7 for information on console access.
4.
CONFIGURING THE AISG‐RM3
In this section, configuring the system settings and managing
user accounts are explained. If not already logged in, log in to
the system as explained in Paragraph 3.6. After you log in, the
main menu screen (Figure 11) is displayed.
Figure 11. Main Menu Screen
Menu tabs in top row
Current user name
In the upper right corner, the current user name is displayed. It
is “admin” in this case (see red arrow). Menu names are dis
played as “tabs” in the first row near the top of the main menu.
The available menus are:
_
Device Status
_
System Account
_
Antenna Config File
_
Summary Report
_
Site Information
_
Logout
_
System Setting
4.1
Configure the System Settings
Click on the
System Setting
tab (as shown in Figure 11) to open
the System Setting menu. The System Setting menu (Figure 12)
which appears is further divided into five sections or panels:
Æ
Network Setting (see Paragraph 4.1.1)
Æ
System Information (see Paragraph 4.1.2)
Æ
Power Setting (see Paragraph 4.1.3)
Æ
Device Setting, (see Paragraph 4.1.4) and
Æ
System Time Setting (see Paragraph 4.1.5)
4.1.1
Network Settings
The
Network Setting
section is where the values for IP address,
SubNetwork Mask, and Gateway IP can be changed. Obtain the
new IP for the AISG‐RM3 controller from the site network ad
ministrator. In this example, the settings are:
AISG‐RM3 IP: 192.168.0.92
Gateway IP: 192.168.0.1
Figure 13. Network Settings
The data fields are explained in Table 5.
Figure 12. System Setting Screen
Æ
Æ
Æ
Æ
Æ
