West Mountain Radio RIGblaster DXpro, Руководство по эксплуатации, Страница: 13 / 26

13
West Mountain Radio Operating Manual
A simple way to do this is to use Windows Sound Control Panel. To quickly
navigate there hold down the Windows key on your keyboard and tap the letter
R. This will bring up a Run box.
Type in mmsys.cpl and press the enter key.
Notice the tabs at the top of the window.
Select Playback (if not already selected)
and double click on the Speakers DXpro
Main/Sub/TX entry.
Select the Levels tab and adjust the
Speaker level to approximately 75%. If
you find this provides too strong a signal
to your transceiver you may lower it to
any value. Note the Microphone volume
shown here is not the recording level. It
should be set to 0 and muted to prevent
audio feedback. Click on OK.