8
8. While another person holds the Upright (13)
near the Frame (1), locate the wire tie in the
Upright.
See the inset drawing.
Tie the lower end of the
wire tie to the end of the Wire Harness (27).
Pull the other end of the wire tie upward out of
the top of the Upright (13).
Insert the excess wire downward into the Frame
(1). Then, insert the Upright (13) into the Frame.
Tip: Avoid pinching the wires.
Attach the
Upright (13) with three M8 x 20mm Patch
Screws (34) and three M8 Split Washers (42).
7. Attach the Seat (12) to the Left and Right Seat
Brackets (14, 15) with four M6 x 35mm Button
Screws (61) and four M6 Washers (52).
7
12
52
61
52
52
15
14
61
1
13
34
34
42
42
27
Avoid pinching
the wires
8
27
Wire
Tie
