7
HOW TO OPERATE THE CONSOLE
Note: If there is a piece of clear plastic on the face of
the console, remove it before operating the console.
1. To turn on the power, press the mode button or sim-
ply begin pedaling. When the power is turned on,
the entire display will appear for two seconds. The
console will then be ready for operation.
2. Select one of the five modes:
Scan mode—
When the power
is turned on, the
scan mode will
automatically be
selected. One
mode indicator
will show that
the scan mode
is selected, and
a second mode indicator will show which mode is
currently displayed. Note: If a different mode is
selected, you can select the scan mode again by
repeatedly pressing the mode button.
Time, speed,
distance, or
calories
mode—To
select one of
these modes for
continuous dis-
play, press the
mode button
repeatedly. The mode indicators will show which
mode is selected. Make sure that the scan mode is
not selected.
3. To reset the display, hold down the mode button for
two seconds. After the display is reset, the scan
mode will be selected.
4. To turn off the power, simply wait for about four min-
utes. Note: The console has an “auto-off” fea-
ture. If the pedals are not moved and the mode
button is not pressed for four minutes, the
power will turn off automatically in order to con-
serve the batteries.
Mode Indicators
