Weslo PRO 10.8x, Руководство пользователя

Страница: 10 / 24

10
11
25
24
Tab
31
11. Identify the Left Pedal (24), which is marked
with a “Left” sticker. Firmly tighten the Left
Pedal counterclockwise into the left arm of the
Crank (31).
Tighten the Right Pedal (not shown) clockwise
into the right arm of the Crank. IMPORTANT:
Tighten both pedals as firmly as possible.
After using the exercise bike for one week,
retighten the pedals. For best performance,
keep the pedals tightened.
Adjust the Left Pedal Strap (25) to the desired
position, and press the end of the Left Pedal
Strap onto the tab on the Left Pedal (24).
Adjust the Right Pedal Strap (not shown) in
the same way.
12. Make sure that all parts are properly tightened before you use the exercise bike. Note: Some hardware
may be left over after assembly is completed. Place a mat beneath the exercise bike to protect the floor.
13
36
10
10. While another person holds the Upright (13)
near the Frame (1), connect the Upper Wire
Harness (36) to the Lower Wire Harness (8).
Tip: Do not pinch the wires. Slide the Upright
(13) onto the Frame (1).
Attach the Upright (13) with three M8 x 25mm
Button Screws (33) and three M8 Split Washers
(59).
8
33
33
59
59
1
Avoid pinching
the wires