13
26. Attach the end of the Long Cable (47) to the Long
“U”-Bracket (23) with an M8 Nylon Locknut (58)
and an M8 Washer (60).
See the inset drawing.
Do not overtighten the Nylon Locknut; it
should be threaded onto the end of the Cable
so only two threads are showing above the
nut.
27. Press two 38mm Square Inner Cap (53) into the
Seat Frame (5).
Insert the M6 x 50mm Carriage Bolt (71) into the
centre hole in the Seat Plate (42). Attach the Seat
Plate to the Seat (12) with two M6 x 16mm
Screws (67).
Insert the M6 x 50mm Carriage Bolt (71) into the
indicated hole in the Seat Frame (5). Tighten an
M6 Nylon Locknut (61) and an M6 Washer (63)
onto the Carriage Bolt.
Attach the other end of the Seat (12) to the Seat
Frame (5) with an M6 Washer (63) and the M6 x
50mm Screw (70).
27
12
71
42
67
53
5
53
63
61
70
58
58
47
23
47
23
Seat Assembly
26
60
28. Press two 38mm Square Inner Caps (53) into the
Leg Lever (8). Attach the Seat Bumper (40) to the
Seat Frame (5) with an M4 x 20mm Screw (84)
and an M6 Washer (63).
Lubricate the M10 x 62mm Bolt (87) with grease.
Attach the Leg Lever (8) to the Seat Frame (5)
with the Bolt and an M10 Nylon Locknut (68).
Do
not overtighten the Nylon Locknut; the Leg
Lever must be able to pivot freely.
Attach an Eyebolt (88) to the Leg Lever (8) from
the direction shown with an M8 Washer (60) and
an M8 Nylon Locknut (58).
28
5
53
58
84
63
40
68
8
88
53
60
87
Lubricate
