8
4.
To protect the floor or carpet from damage,
place a piece of cardboard underneath both
ends of the Frame (67).
With the help of a second person, raise the
Uprights (96, 98) so the Base (101) is flat on the
floor as shown. Next, position the front of the
Frame (67) between the Uprights.
See the inset drawing.
Locate the wire tie in-
side the lower end of the Right Upright (98).
Wrap the wire tie around the end of the Upright
Wire (97). Next, locate the opposite end of the
wire tie, which is extending from the top of the
Right Upright. Pull the wire tie until the Upright
Wire is routed completely through the Right
Upright.
97
98
4
Wire
Tie
3. Orient the Left Upright (96) and the Base (101)
as shown. Attach the Left Upright to the Base
with two M10 x 53mm Patch Bolts (18), two M10
Flat Washers (16), and two M10 Star Washers
(8);
do not fully tighten the Patch Bolts yet.
96
101
3
18
16
8
96
101
Wire
Tie
97
98
67
Wire
Tie
