10. Press a 7/8” Round Inner Cap (53) into the
Right Arm (58). Insert two 1 1/2" Square Inner
Caps (6) into the Right Arm.
Attach an 11” Weight Tube (63) to the Right
Arm (58) with a 5/16” x 4 1/2” Bolt (25), a 5/16”
Washer (3), a 1/2” x 5/16” Spacer (24), a 2 3/4”
Spacer (26), and a 5/16” Nylon Locknut (1).
Insert 1” Round Inner Caps (12) into both ends
of the Weight Tube (63). Slide a Weight Stop
(13) onto the Weight Tube.
Assemble the Left Arm (not shown) in the same
manner.
11. Insert a 3/4” x 1 3/4” Spacer (23) into the weld-
ed tube on the “H” Frame (52). Lubricate the
axle on the Right Arm (58). Insert the axle into
the welded tube. Make sure that the 2 3/4”
Spacer (26, see drawing 10) is on the outside
of the “H” Frame. Insert a Spring Clip (27) into
the axle so that it locks into the hole in the axle.
Insert a 7/8” Round Inner Cap (53) into the
welded tube.
Attach the Left Arm (not shown) in the same
manner.
12. Attach a 9” Pad Tube (62) to the Right Arm (58)
with a 5/16” x 2” Bolt (10), two 5/16” Washers
(3), a 1/2” x 7/16” Spacer (11), and a 5/16”
Nylon Locknut (1).
Press two 3/4” Round Inner Caps (16) into the
9” Pad Tube (62). Slide a 7” Foam Pad (19)
onto the Pad Tube.
Repeat this step for the Left Arm (not shown).
13. Attach the Curl Pad (43) to the Curl Tube (44)
with two 1/4” x 5/8” Screws (7).
8
9
13
10
11
12
53
58
1
26
25
24
3
6
6
13
12
27
53
58
52
10
3
3
11
16
58
1
16
19
7
43
44
63
Lubricate Axle
62
Welded Tube
14. Press Square Inner Bushings (35) into the top
and bottom of the Weight Carriage (41). Press
a 1” Round Inner Cap (12) into each side of the
Weight Carriage.
Slide the Weight Carriage (41) onto the Lat
Tower (40). The Weight Carriage must be
turned so the weight tube is on the side
shown and the welded tab is pointed toward
the top of the Lat Tower.
15. Insert the “U” Bracket (33) into the indicated
hole in the Lat Tower (40). Attach the “U”
Bracket with a Square Plate (31) and a 5/16”
Nylon Locknut (1). Make sure that the “U”
Bracket is on the side of the Lat Tower
shown.
14
15
35
35
41
12
12
Welded Tab
Weight Tube
40
33
31
1
40
23
