Power Clean
W4000
15
Step 7. replace Brushroll
• Hold the opposite end of brushroll in
place. Push the belt end forward and
down while rotating the end plate
(F) until it slides into place. Turn the
brushroll, making sure it rotates freely.
Step 8. replace Brushroll Cover
• Place brushroll cover back over
the brushroll.
• Replace the two cover screws.
Step 9. replace Powerhead Cover
• The nozzle must be in the upright
locked position.
• Position the hood on top of nozzle
base. Make sure wires and buttons are
aligned. do not force the hood on.
• Turn the nozzle over.
• Replace the screws for the hood and
base.
See Step 1.
B
