7
6
PE
TS
W1000
Assembling Your Cleaner
The cleaner should be switched off and disconnected from the mains
power supply before you start to assemble.
1. Do not extend the power cable
beyond the yellow mark.
2. Press the On/Off button to switch
the appliance on.
3. Rotate the speed control dial to
adjust the suction of the vacuum.
INSTRUCTIONS FOR USE (cont’d)
Combination
Floor Tool
Ideal for daily
cleaning on carpets
and hard floors.
Mini Hand Turbo Brush
Ideal for picking up pet hair on upholstery.
Note: The mini hand turbo brush adaptor
must be used to fit the rod to the accessory.
1. Insert the smaller end of the adaptor into
the end of the mini hand turbo brush.
2. Insert the larger end of the adaptor into the
end of the telescopic wand.
3. The mini hand turbo tool is now ready to be used with the vacuum.
Note: By unlocking the side release buttons, the external bristles can be
rotated to face upwards allowing a closer clean as required.
Safety Precautions:
1. Keep hair, hands and feet away from rotating brush while the mini
hand turbo brush is running.
2. Remember the mini hand turbo brush will operate whenever it is
connected to a running vacuum. If children are present, make sure
to turn the vacuum system off when leaving the mini hand turbo
brush unit unattended.
3. Do not attempt to service or unclog the mini hand turbo brush while
the unit is running.
Cleaning on carpet
Cleaning on hard floors
