Werner R2 Series, Инструкция пользователя

Страница: 5 / 12

Appendix A Auto Coil 2™SRL’s
USER INSTRUCTIONS
Page 5
ENGLISH
© 2016 Werner Co.
P/N107027-03
Rev B 10/16
Read all warnings and instructions in
User Manual prior to use and follow
accordingly. If missing, contact Werner
Co. for a replacement. Inspect product
prior to each use, then at least monthly by a
competent person who is not a user. Before use
withdraw and retract some cable and tug sharply
to ensure that the pawls engage properly and the
unit retracts normally. Avoid exposure to sharp
edges, chemicals, or environmental hazards
that could weaken the product. User
repairs or alterations are
NOT permitted.
Only the harness back D-ring (A) to
be used for fall arrest. Verify
If the red indicator on the snaphook
is visible, this indicates the product
has seen a fall and should be
removed from service.
See the User Manual for more
details. User must be trained
before using this product.
connectors are compatible (see User
Manual). Ensure that the anchorage
strength is 5,000 lbs. (22kN) or more,
or certified by a Qualified Person to take
twice the foreseeable load. To minimize
swing fall, anchor as directly above work
area as possible. Check for unobstructed
clearance beneath. Do not permit the lifeline to
become slack. Verify that this product is suitable
for the chosen fall protection. See instructions
for suitability for horizontal use and horizontal
lifeline compatibility.