background image

WARNING LABEL LOCATIONS

  

WARNING: It is essential to the safety of the end user that the seller of this device 

include all instructions pertaining to the proper use, maintenance and inspection of 

the device in the language of the country in which the product is to be sold.

BREAKING STRENGTH: 5000 lbf (22.2 kN)

MFG: MM/YYYY

WARNING: All persons using this equipment must read, understand and follow 

all instructions.  Failure to do so could result in serious injury or death.

Hybrid B

eamer

M

odel: 

A555000

Ba

tc

h #

 XXXX

Compliance: OSHA 1926.502, OSHA 1910.140, ANSI Z359.18 Type A, ANSI Z359.7(19)

EN 795:2012 Type B CE 2777

Stainless Steel, Aluminum, Zinc Plated Steel, Bronze

Pat # US 8,312,966 / US 8,646,575 / US 8,973,705 B2

MAX

1(888) 523-3371  

P/N 112573-07 REV C 1/21

  

P/N 112573-04 REV E 5/21

  

2777

WARNING:

 

ALL USERS OF THIS EQUIPMENT MUST READ AND 

UNDERSTAND ALL INSTRUCTIONS. FAILURE TO DO SO MAY 

RESULT IN SERIOUS INJURY OR DEATH. USERS SHOULD BE 

FAMILIAR WITH PERTINENT REGULATIONS GOVERNING THIS 

EQUIPMENT. ALL USERS OF THIS PRODUCT MUST BE PROPERLY 

INSTRUCTED ON HOW TO USE THE DEVICE. AVOID CONTACT 

WITH PHYSICAL HAZARDS (THERMAL, CHEMICAL, ELECTRICAL, 

ETC.). MAKE ONLY COMPATIBLE CONNECTIONS.

Содержание A555000









Отзывы: