16
WiPG-1600 User’s Manual
<Note: The network configuration of WiPG-1000 is automatic via DHCP>
The default setting of the WiPG-1000 is DHCP client. When the WiPG-1000 is
connected to a LAN that already has a DHCP server present, the WiPG-1000 takes an IP
address assigned to it by the server. When the WiPG-1000 is connected to a LAN that
does not have a DHCP server, the WiPG-1000 can become the DHCP server in the
network.
< IP Setup >
♦
You can select “obtain an IP address automatically” or “Use the following IP
address”
♦
IP Address: The default value is 192.168.100.10.
♦
Subnet Mask: The default value is 255.255.255.0
♦
Default Gateway: The default value is 192.168.100.10
♦
DNS Server: The default value is 192.168.100.10
< DHCP Server Setup >
♦
You can select “Auto” (Enable/Disable the DHCP Server) or “Disable”
♦
Start IP: The start IP address of the DHCP Server
♦
End IP: The end IP address of the DHCP Server
♦
Subnet Mask: The default value is 255.255.255.0
♦
Default Gateway: The default value is 192.168.100.10
♦
DNS Server: The default value is 192.168.100.10
< Wireless Setup >
♦
Wireless LAN: The default value is “Enable”.
♦
Host Name and Domain Name: The default name is “WiPG-1000-xxx”(xxx are
the last three numbers of the MAC ID shown on the bottom side of the
WiPG-1000)
♦
SSID Broadcast: The default value is “Enable”
♦
Band: The default value is “2.4 GHz” ( the “5 GHz” option is available in some
regions)
♦
802.11 mode: The default value is “2.4G B/G/N mixed”
♦
Channel: The default value is “Auto” (you can also choose to set a fixed
channel). The “Auto” option means that after the WiPG-1000 is powered on,
the system will scan all the wireless channels and select a clear channel
automatically.
♦
Encryption: The default value is “Disable” (you can also choose “WEP”, “WPA”
or “WPA2”)
♦
Key: If the “Encryption” function is enabled, you have to set a key value