4.0 OPERATIONS
4.1 Connecting the Power Supply
This product is being equipped with an external Power Adaptor,
which works under the following conditions.
•
Nominal
Voltage
: 220 VAC
•
Voltage range
: 150 to 270 VAC
•
Frequency
: 47 to 53 Hz
CAUTION:
Use of an incorrect power supply may cause fire or electrical shock
4.2 Connecting your product to Computer :
•
The Serial interface cable from the Computer has to be connected as shown in
Adaptor
Cable
Serial Interface
Cable
USB
Interface
For BP 85T/25T Only
4.3 Operation of product in Battery Mode :
(Applicable to Product BP25T/BP-50T & BP85T only)
When product is in ON condition, blinking of “Paper out LED” indicates that
machine is working in battery mode. If battery voltage is dropped to 60% then
buzzer will start beeping at regular interval of 5 minutes. If battery voltage drops
below 50% then machine will go to power saving mode and stop working till power
is retained or battery is charged.
4.3.1 Battery backup time:
90 Minutes with 100% duty cycle approx.
4.3.2 Safety Precautions for Lithium Ion Battery Pack
1. Replace the batteries with the same rating as present in the unit.
The Battery type and rating is mentioned on
the Battery Cover under the unit.
2. Do not remove the battery from the Machine.
3. Do not remove the battery seal
4. Never dispose the batteries in a fire. They may explode. Never
short-circuit the Battery
5. In the event battery fluid leaks and get in to eye, do not rub the eye. rinse
well with water and immediately seek medical care. If left untreated
otherwise the battery fluid can cause damage to eye.
4.3.3 Li-Ion Battery Specification:
Comes with shrink-wrapped re-chargeable battery pack
Capacity: 2 cells 8.4V, 2200mAh.
Dimension: 69.5 x 37.5 x 19.5 (W x H x T) in mm.
Note : Programming of product through PC cannot be done in Battery mode.
4
