14
Functional Overview
Designation
Function
Key designation
NPN/PNP
Configuring the outputs
P
N
The output is preset to PNP. Pressing the
N
key sets the output to push-pull.
Pressing the
N
key again sets the output to NPN.
The respective circuit diagram indicates how the output is set:
PNP
Push-pull
NPN
NO/NC
Configuring the outputs
NO
NC
Outputs can be set up as normally open or normally closed by
pressing the
NO
or the
NC
key. The respective circuit diagram is displayed.
ON Delay
Adjusting ON Delay
+
-
ON Delay can be set to a value within
a range of 0 to 10.000 ms by pressing
the + or the – key.
OFF Delay
Adjusting OFF Delay
+
–
Off-delay is adjusted by pressing the
+ or the – key. Off-delay is disabled if
a impulse duration has already been
selected. If this is the case,
Impulse!
appears at the control panel.
Object
OFF Delay
Output
Impulse
Adjusting the impulse duration
+
–
Impulse duration defines how long the output
signal remains in the
activated
state. Impulse
duration can be set to a value within a range of 0
to 10.000 ms by pressing the + or the – key. After
the selected impulse duration has elapsed, the
output signal is returned to the
deactivated
state.
Function can be
combined with
ON-delay.
Extern T
External Teach
By pressing the button
can be selected, if an ”Object Teach-In”, a “Background
Teach-In”, or “Teach-In of a tolerance window” is executed at the External Teach-In.
