Wenglor weCat3D MLSL, Руководство по эксплуатации

Страница: 31 / 71

31 2D/3D Profile Sensors
4.5 LED Display
LEDs
68
85
78
4a
A26
7a
68 = Power
85 = Link/Act
78 = Module status
4a = User-LED
7a = Laser (only MLSL2 with Laser Class 3R and 3B)
LED Designation Status Function
68 Power Blue Operating voltage on
Off Operating voltage off
85 Link/Act Green Link included (1000 Mbit), no transmission
Green blinking Communication (1000 Mbit)
Red Link included (1000 Mbit), no transmission
Red blinking Communication (100 Mbit)
Orange Link included (10 Mbit)
Orange blinking Communication (10 Mbit)
Off No Ethernet device connected
78 MS
(Module Status) Green Device operative
Green blinking Standby
Red blinking Device error
Red Device error
Off Device doesn’t start up
4a User LED Green The user can activate this LED individually.
Red The user can activate this LED individually.
Orange The user can activate this LED individually.
Off The user can activate this LED individually.
7a Laser Green Laser approval available
Red No laser approval
Off No supply voltage for laser shutdown
NOTE!
10 Mbit connection (orange LED lights up / blinks) is inadequate for error-free functioning
(see also “Network Buffer” under
7.2).