Wenglor LV250, Руководство по эксплуатации

Страница: 20 / 38

20
EN
Table of Contents
Table of Contents
1. Proper Use 21
2. General information 21
3. Safety Precautions 21
4. EU Declaration of Conformity 21
5. Technical Data 22
5.1. Wiring Diagram LV250xCT 23
5.2. Wiring Diagram SA250-xxx/EA250-xxx 24
5.3. Dimensions/Control Panel 24
6. Mounting Instructions 25
6.1. Apply to DIN rail 35 mm according to EN 50022 25
7. Settings 25
7.1. NO/NC Selection (applies to all outputs) 26
7.2. Teaching In the Sensitivity 27
7.2.1. NORMAL TEACH 27
7.2.2. MIN TEACH 28
7.2.3. TEACH-IN in areas with high probability of contamination (dust, damp, aso.) 28
7.3. Logic Output 28
7.4. Alignment Tool 30
7.5. Switch Position during Operation within the Application 32
7.5.1. RUN NORMAL 32
7.5.2. RUN ON-DELAY 33
7.5.3. RUN OFF-DELAY 34
7.6. Cascading 35
7.7. External Teach-In via the Bus Terminal

37
7.7.1. Normal External Teach-In 37
7.7.2. Minimal External Teach-In 37
8. Maintenance Instructions 38
9. Proper Disposal 38