Wenglor EtherCAT ZAC50CN0 Series, Руководство по эксплуатации

Страница: 10 / 29

10
EN
Connecting cable M12×1; 4-pin; D-coding Order number: ZAV51R201,
Order number: ZAV51R601,
Suitable Plug:
51
Cable length: 2 m (ZAV51R201)
Cable length: 10 m (ZAV51R601)
Order number: ZAV51R202,
Order number. ZAV51R602,
Suitable Plug:
51
Cable length: 2 m (ZAV51R202)
Cable length: 10 m (ZAV51R602)
2
Connection and power supply cables
M12×1; 4-pin, different lengths are available for connecting the sensor/actuator.
Legend
Wire Colors according to
DIN IEC 757
Platinum measuring resistor
not connected
Test Input
Test Input inverted
Trigger Input
Analog Output
Ground for the Analog Output
Block Discharge
Valve Output
Valve Control
Valve Control Output 0 V
Synchronization
Receiver-Line
Emitter-Line
Grounding
Switching Distance Reduction
Ethernet Receive Path
Ethernet Send Path
Interfaces-Bus A(+)/B(–)
Emitted Light disengageable
Magnet activation
Input confirmation
Contactor Monitoring
Encoder A/A (TTL)
Encoder B/B (TTL)
Black
Brown
Red
Orange
Yellow
Green
Blue
Violet
Grey
White
Pink
Green/Yellow
Supply V
Supply Voltage 0 V
Supply Voltage (AC Voltage)
Switching Output
(NO)
Switching Output (NC)
Contamination/Error Output (NO)
Contamination/Error Output (NC)
Input (analog or digital)
Teach Input
Time Delay (activation)
Shielding
Interface Receive Path
Interface Send Path
Ready
Ground
Clock
Output/Input programmable
Power over Ethernet
Safety Input
Safety Output
Signal Output
Ethernet Gigabit bidirect. data line (A-D)
Encoder 0-pulse 0-0 (TTL)
Encoder A
Encoder B
Digital output MIN
Digital output MAX
Digital output OK
Synchronization In
Synchronization OUT
Brightness output
Maintenance
PT