17
Installation (continued)
This procedure is for securing wall mount lockers to the structure.
See the next page for securing island mount lockers to the structure.
This instruction is for standard installation only.
For seismic installation, see the instructions included with the Seismic Wall Kit 243A024.
STOP
Secure Lockers to Back Wall (wall mount lockers only)
Because materials and construction of walls can vary, fasteners for attaching the lockers to the structure
are not provided� The installer must choose the appropriate fastener and follow the manufacturer’s instructions�
See “Fasteners - Not Supplied" on page 5 for more information�
NOTE:
At least every 2nd locker must be secured to the back wall�
NOTE:
Make sure all adjacent locker sides are
secured together before attaching them
to the back wall�
1� Place the wall bracket (13) onto the top
of the locker and position it to be flush
with the back wall�
The brackets have extra holes for the
best fit on the top of the locker.
2� Secure the bracket to the locker
using a minimum of two
#8 x 5/8" pan head screws (14)�
3� Secure the wall bracket to the wall
using the appropriate fasteners�
4� Reattach the bottom shelves
in the lockers�
5� Install any optional equipment
as shown on the following pages
before continuing to
“Finalize Installation" on page 23�
In addition to the sides of the lockers being secured,
the locker backs must also be attached to a back wall.
!
CAUTION
Inferior or improperly installed fasteners
could cause the lockers to tip over.
!
WARNING
Attach to the
locker using
a minimum of two
#8 x 5/8"
Pan Head Screws
(14)
Wall Bracket
(13)
Slide
shelf in
Reattach
screws