25
Island Configuration Installation (continued)
c. Using more than one person, position the bank of extension lockers to align flush with
the starter lockers.
d. Align the extended wires of the Top Grilles, Bottom Grilles and Back Panel with the
matching holes in the Extension Side Panel.
e. Connect the Base Extension to the Base Starter using two 1/4-20 x 2” Capscrews (8),
1/4 Dia x .734 Flat Washers (6) and 1/4-20 Lock Nuts (9).
18. Attach the Starter Connector to the Extension Connector using one
1/4-14 x 3/4” Self-Tapping Screw (5). Position the Screw 1” (2.5 cm)
from the edge of the Starter Connector.
19. Attach the Support Legs of the expansion bank of lockers to the floor.
Use the same procedure as described for the starter bank in step 16.
1/4-20 x 2”
Capscrew
(8)
Assembled
expansion bank
1/4-Dia x .734
Flat Washer
(6)
1/4-20
Lock Nut
(9)
1/4-14 x 3/4”
Self-Tapping
Screw
(5)
1”
(2.5 cm)
