Wenger Fixed Media Cabinets, Руководство пользователя

Страница: 8 / 16

8
Installation
(continued)
Attach the Cabinet to the Floor
1. Attach a Cabinet Cleat (#2) to the inside of both End Panels.
a. Attach each Cabinet Cleat using a 1/4-14 x 5/8 Sheet Metal Screws (#3) through the
slotted hole into the predrilled hole at the bottom of the End Panel.
Leave the Screws loose enough so that the Cleats drop down and rest on the floor.
2. With the bottoms of the Cabinet Cleats against the floor, anchor them to the floor using the
appropriate fasteners as indicated in the “Structural Fasteners” section.
3. Finish attaching both Cabinet Cleats to the End Panels using two
#10-16 x 3/4 Sheet Metal Screws (#4).
4. Tighten both 1/4-14 x 5/8
Sheet Metal Screws (#3).
For applications requiring stamped seismic approval,
see your Wenger Sales Representative.
1/4-14 x 5/8
Sheet Metal Screw
(#3)
#10-16 x 3/4
Sheet Metal Screws
(#4)
After anchoring
to floor.
Cabinet Cleat
(#2)
Anchor to floor using
appropriate fasteners.
The cabinet must be anchored
to both the floor and a wall.
!
CAUTION