Wenger Fixed Media Cabinets, Руководство пользователя

Страница: 13 / 16

13
Operation
(continued)
Rackmount Electronics
1. Electronic components can be accessed by tipping out the Rackmount.
2. Additional electronic components can be added but must be done so according to their
manufacturer’s specifications.
Place deeper components at the bottom of the Rackmount.
3. Knockout Panels can be removed from the Rackmount by twisting them until they break away
from the frame.
4. To open the Rackmount, remove the two Screws securing it to the above Fixed Shelf
and carefully tip it down until the bottom rests on the shelf below.
5. Cage Nuts (#10) can be relocated or installed to match component settings.
6. When routing cables inside of the Rackmount, leave enough excess to tip the Panel forward.
Use a fan if electronic component
overheating is a concern.
Do not block the top ventalation
holes.
!
CAUTION
Do Not Block
Ventilation Holes
Knockout
Panels
Rackmount
Install Additional
Cage Nuts
(#10)
Remove
Screws to
Open