Wenger Fixed Media Cabinets Скачать руководство пользователя страница 1

Owner’s Manual

Media Storage Systems 

Fixed Media Cabinets

©Wenger Corporation 2014 

Printed in USA 08/14 

Part #258A999-02

Wenger Corporation, 555 Park Drive, P.O. Box 448, Owatonna, Minnesota 55060-0448 

Questions? Call.....USA: 1-800-4WENGER (493-6437) • Worldwide: 1-507-455-4100 • www.wengercorp.com

Contents

Important User Information . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Safety Precautions  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Structural Fasteners  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Required Tools. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Component Identification

 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Weight Limits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Digital Lock Accessory Note . . . . . . . . . . . . . . . . . . . . . . . . . .5

Hardware Parts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Template for Mounting Power Strip . . . . . . . . . . . . . . . . . . . . .15

1-Column 

Fixed Media 

Storage Cabinet

2-Column 

Fixed Media 

Storage Cabinet

Note:

  Please read and understand these instructions before starting the installation.

Note:

  Examine the illustrations on the following pages. If you need additional information,  

 

contact Wenger Corporation using the information below.

Visit the Media Storage Cabinet web page at www.wengercorp.com.

Содержание Fixed Media Cabinets

















Отзывы: